Nice one, been meaning to get the S handbook out to fill in some blanks, keep forgetting
| The Porsche 924 Owners Club http://porsche924.co.uk/forum/ |
|
| 924 tech specs reference thread http://porsche924.co.uk/forum/viewtopic.php?f=10&t=30151 |
Page 5 of 10 |
| Author: | Tango130 [ Sun Apr 01, 2018 9:19 am ] |
| Post subject: | Re: 924 tech specs reference thread |
Carrera RSR wrote: I think 84l incl 9l reserve is a little optimistic for a turbo fuel tank Happy to change the data if you could provide a more accurate figure, the original figure of 84l was provided by Lesworth in post #9. |
|
| Author: | Carrera RSR [ Sun Apr 01, 2018 12:47 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Tango130 wrote: Carrera RSR wrote: I think 84l incl 9l reserve is a little optimistic for a turbo fuel tank Happy to change the data if you could provide a more accurate figure, the original figure of 84l was provided by Lesworth in post #9. Did I not send you the tech specs document? |
|
| Author: | Tango130 [ Sun Apr 01, 2018 4:00 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
I don't think so, I've had a quick look through my PMs and couldn't find anything. |
|
| Author: | Carrera RSR [ Sun Apr 01, 2018 5:45 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Tango130 wrote: I don't think so, I've had a quick look through my PMs and couldn't find anything. I sent it to Richardb. Sent to you now |
|
| Author: | Tim_E [ Mon Apr 02, 2018 3:55 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Carrera RSR wrote: Buy from FrazerPart and be secure in the knowledge you are getting the right part and oem quality caprixpack wrote: I usually go for the bosch filter. https://www.eurocarparts.com/ecp/c/Pors ... c04&000231 Thanks guys, I think as I managed to secure a brilliant deal for oil and other sundries I can spend top dollar at FrazerPart! |
|
| Author: | dd924 [ Tue Jul 10, 2018 3:38 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Panel thicknesses measured on 1982 n/a original panels. Outer sill 0.9mm (20 gauge) Floor panel 0.9mm (20 gauge) Central sill strengthener panel 1.0mm (coated) Mid sill jacking point 1.6mm (16 gauge) |
|
| Author: | Tango130 [ Fri Feb 01, 2019 3:11 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Model specification page now live, located in the technical section under general. https://porsche924.co.uk/technical/?article=44 |
|
| Author: | scm924s [ Fri Feb 01, 2019 4:29 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Nice one, been meaning to get the S handbook out to fill in some blanks, keep forgetting
|
|
| Author: | scm924s [ Fri Feb 01, 2019 5:23 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Just had a quick look through for the S, there appears to be one error, the polyrib alternator belt I believe is incorrectly called up for the Turbo, should be for the S.(unless the Turbo is the same which I don't believe) Missing bits for the S oil for top up approx 1 litre washer reservoir 6 litres Ground clearance 120mm Might be worth adding for the S power steering approx 0.6 litres of ATF (Dexron) |
|
| Author: | althejazzman [ Thu May 16, 2019 1:29 pm ] |
| Post subject: | Re: 924 tech specs reference thread |
Tango130 wrote: Carrera RSR wrote: I think 84l incl 9l reserve is a little optimistic for a turbo fuel tank Happy to change the data if you could provide a more accurate figure, the original figure of 84l was provided by Lesworth in post #9. I'm also surprised at that figure, as I can fit no more fuel in my 924 Turbo as I could in my 944 |
|
| Page 5 of 10 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|